Preparation

Ensure the surface is clean, dry and free from varnish or other finishes. Raw or oiled woods: lightly sand (240 grit) and remove dust. Stained or varnished woods: sand back to the original bare wood. Ensure the surface is dust-free.

Application

Apply a generous coat of cream, using a lint-free cotton cloth. Allow to dry for a minimum of 3 hours before applying a second coat of cream. The furniture is protected when the wood does not absorb the cream anymore. A 3rd coat may be necessary if the wood is not sealed.

Important

Carry out a water droplet test by applying several droplets to the surface, if the drops remain beaded on the surface after 15 minutes the surface is sealed. If it soaks through apply a further coat. The product finish may vary depending on the type of wood. Always test product’s on a spare surface or inconspicuous area.

Cleaning and Maintenance

Clean surface dirt with Liberon Garden Furniture Cleaner before re-finishing. For continued protection all timber should be re-finished once or twice a year as routine maintenance.